VEVOR 50-Ton Air Hydraulic Bottle Jack with Pneumatic & Manual Operation - Red - Free US Shipping

🚚 FREE U.S. Shipping
📦 Delivery: 2 – 5 Business Days
🔒 Secure Checkout

Handle heavy-duty lifting tasks with the VEVOR 50-Ton Air Hydraulic Bottle Jack. Designed for demanding automotive, truck, RV, workshop, and repair applications, this jack combines pneumatic air operation with manual hydraulic pumping for flexible use in different work environments.

With a rated lifting capacity of up to 50 tons / 110,231.5 lb and a lifting range of approximately 10.4 to 16.1 inches, it is built for heavy vehicles and equipment that fall within the jack’s rated capacity and dimensional limits.

50-TON RATED CAPACITY

The jack is rated for loads up to:

50 tons / 110,231.5 lb

Never exceed the stated rated capacity.

The jack should only be used at manufacturer-approved lifting points on compatible vehicles or equipment.

DUAL OPERATION

This jack can be operated using:

• Pneumatic air assistance
• Manual hydraulic pumping

For pneumatic operation, the specified working air pressure is:

0.9–1.2 MPa

A compatible compressed-air source is required for air-powered operation.

LIFTING RANGE

The jack provides a lifting range of approximately:

10.4–16.1 in. / 265–410 mm

Before purchase, customers should verify that the jack’s minimum height, maximum lift height, and saddle position are compatible with their vehicle or equipment.

ANTI-SLIP SADDLE

The upper saddle is designed to help provide stable contact with an appropriate lifting point during use.

Always make sure the saddle is properly centered under a suitable lifting point before raising a load.

HEAVY-DUTY CONSTRUCTION

Constructed from cast iron and carbon steel, the jack is built for demanding garage and workshop environments.

The wide base helps provide stability when used on a firm, level, load-bearing surface.

SPECIFICATIONS

Brand: VEVOR
Model: MR8008
Rated Load: 50 tons / 110,231.5 lb
Lifting Range: 10.4–16.1 in.
Working Air Pressure: 0.9–1.2 MPa
Main Materials: Cast Iron + Carbon Steel
Product Dimensions: 15.6 × 9.1 × 10.4 in.
Product Weight: 65.5 lb

IMPORTANT SAFETY INFORMATION

This jack is intended for lifting only.

Never work under a vehicle or load supported only by the jack. After lifting, support the vehicle or equipment with properly rated jack stands or other approved support equipment before performing service or repairs.

Always use the jack on a firm, flat, stable, load-bearing surface.

Do not use on soft ground, slopes, uneven surfaces, or unstable flooring.

Do not exceed the 50-ton rated capacity.

Vehicle compatibility is not guaranteed. Customers should verify:

• Vehicle or equipment weight
• Approved lifting-point location
• Minimum ground clearance
• Required lift height
• Available space around the lifting point

The rated capacity does not mean the jack is suitable for every car, SUV, truck, RV, or piece of equipment.